eBridge200WPM PoE Ethernet transceiver/media converter transmits data and power over Coax or CAT5 cable over distances that are 3 to 5 times greater than standard Ethernet. Upgrading existing Coax analog camera infrastructure to IP cameras is greatly simplified as well. eBridge200WPM can support up to two PoE or PoE+ cameras/devices or a single Hi-PoE (60W) device. The eBridge200WPM/WPMH offers built-in IP management which allows for remote camera reset, monitoring and reporting via various IP protocols. There is no need to install remote AC mains power, since these devices are simply powered from the low voltage PoE midspan/endspan equipment, such as Altronix NetWay midspans or eBridge100SPR.
- General Information
- Manufacturer
- Altronix Corporation
- Manufacturer Website Address
- http://www.altronix.com
- Brand Name
- Altronix
- Product Line
- eBridge
- Product Type
- Transceiver/Media Converter
- Warranty
- Limited Warranty
- Lifetime
- Interfaces/Ports
- Total Number of Ports
- 2
- Network (RJ-45)
- Yes
- DVI
- No
- USB
- No
- Management Port
- No
- Number of PoE+ (RJ-45) Ports
- 2
- Media & Performance
- Media Type Supported
- Twisted Pair
- Maximum Distance Supported
- 0.50 km
- Network & Communication
- Ethernet Technology
- Fast Ethernet
- Network Technology
- 100Base-TX
- Physical Characteristics
- Form Factor
- Pole
- Height
- 9.5"
- Width
- 7.3"
- Depth
- 4.9"
- Weight (Approximate)
- 2.20 lb
- Miscellaneous
- Package Contents
- eBridge EBRIDGE200WPMH Transceiver/Media Converter
- 3 x 5/8" Wiring Inlets
- NEMA Rated Glands
- Environmentally Friendly
- Yes
- Country of Origin
- United States
