IRG5541+ LTE Router with integrated: LTE-A PRO (CAT12 600M / 150M), GPS/GNSS, Wireless LAN (2.4/5 GHz), 4 x 10/100/1000 RJ45 Ethernet, USB-C Port, RS232, 3 x GPIO, IGN (ignition sense pin), Relay output, RS485 half-duplex, IP54 enclosure. GPIO Cable w/4 pin plug and LTE antennas included.
Perle IRG5541+ LTE Routers and Gateways have the most comprehensive set of features, functionality, and performance to provide primary or failover back-up connectivity to remote infrastructure and assets. These ultra-low-power, rugged, high-performance Cellular Routers, with dual-SIM slots, are easily deployed with no need for training because of the intuitive web GUI. For advanced admin scrips, CLI commands are also available.
- TE Router for Primary or Failover Connectivity
- Support for 24x LTE Bands and 9x UMTS/WCDMA Bands
- LTE-A PRO CAT12. 600Mbps downlink and 150Mbps uplink speeds.
- 4-port 10/100/1000 Ethernet
- Network connectivity via LTE, 10/100/1000 Ethernet, USB 3.2, and RS232/RS485 Serial
- One GPIO configurable as high side pull-up / dry contact, analog input, digital input, low side current sink output, digital output/open drain, or Pulse Counter.
- One GPIO configurable as Vehicle ignition sense or analog input
- Two Digital Inputs configurable as high side pull-up / dry contact, digital input, or Pulse Counter
- One normally open (NO) relay contact
- Ultra-Low-Power consuming less than 1 Watt in idle mode and 53mW in standby mode
- Rugged die-cast aluminum IP54 enclosure for dust & water ingress
- Shock and vibration resistance certified to MIL-STD-810G, SAE J1455 & EN 61373
- Hazloc per IECEx/IECx, ATEX, & ANSI/ISA Class 1 Div 2
- -40F to 158F ( -40C to 70C ) operating temperature
- GPS / Global Navigation Satellite System (GNSS) Included
- E-Mark Certification, ISO 7637-2, and ISO 16750-2 Compliance
- Built-in battery charge protection, with no requirement for external power conditioning, to safeguard vehicle operation
- Vehicle awareness applications can be used to remotely monitor vehicle speed, acceleration, position, and more.
- Ignition Power Management can schedule a delayed shutdown or startup of the IRG5541+ based on the vehicle ignition status
- European Railway Certifications EN50155 & EN50121
- International Railway Certifications IEC60571 & IEC62236
- Cellular tower connectivity can be established and maintained at up to 360kph (224mph)
With extensive protocol routing support (RIP, OSPF, BGP-4, IPv4, IPv6, OpenVPN, IPSec VPN, and DHCP), integrated zone-based policy firewall, 2 Factor Authentication, and remote authentication (RADIUS, TACACS+) management, the IRG5541+ LTE Router will integrate seamlessly with enterprise-grade systems in hierarchical or large mesh network structures to control access to devices in the field and protect inside networks from unauthorized access.
- General Information
- Manufacturer
- Perle Systems, Inc
- Manufacturer Website Address
- http://www.perle.com
- Brand Name
- Perle
- Product Type
- Modem/Wireless Router
- Technical Information
- Network Band
- Dual Band
- Wireless Specifications
- Broadband Transmission Technology
- Cellular
- ISM Band
- Yes
- UNII Band
- Yes
- ISM Maximum Frequency
- 2.40 GHz
- UNII Maximum Frequency
- 5 GHz
- Cellular Data Connectivity Technology
- LTE
- LTE Advanced Pro
- UMTS
- WCDMA
- Total Wireless Transmission Speed
- 75 MB/s
- Wi-Fi Mesh System
- Yes
- Interfaces/Ports
- Total Number of Network Ports
- 4
- USB
- Yes
- USB Standard
- USB 3.2 Type C
- Network & Communication
- Ethernet Technology
- Gigabit Ethernet
- VPN Supported
- Yes
- Multi-SIM Supported
- Yes
- Number of SIM Card Supported
- 2
- Battery Information
- Built-in Battery
- Yes
- Miscellaneous
- Package Contents
- IRG5541+ LTE Router
- GPIO Cable w/4 Pin Plug
- LTE Antennas
- Certifications & Standards
- IEC60571
- IEC62236
- EN50155
- EN50121
- ISO 7637-2
- ISO 16750-2
- MIL-STD-810G
- SAE J1455
- EN 61373
- Environmentally Friendly
- Yes